Cat6a Patch Cable

  • Conductors: 24AWG or 26AWG stranded bare copper.
  • INsulation: polyolefin
  • Color code:
    pair1: blue ,white/blue
    pair2: Orange, white/orange
    pair3: Green, white/Green
    pair4: Brown, white/brown
  • Ripcord: under jacket
  • Jacket: PVC or LSZH
  • Standards: UL444/CSA-C22.2 No 214,Type CM
  • EIA/TIA-568A and EIA/TIA-568B.2,Horizontal cable
  • Applications: internet, computer
  • UTP: unscreen cable
  • STP : single shielding Network cable ,Mylar tape,Aluminum-mylar tape and Drain wire
  • SFTP: Double shielding cable,Mylar tape,Aluminum-Mylar tape and drain wire and bare or tinned copper braid
  • Network cable Connector detail specification:
    RJ45 8P8C nickel type
    RJ45 8P8C golden type

Inquiry This Item

ANSI/TIA/EIA-568-C.2  T568A & T568B
ISO/IEC 11801  8-position conductor/pair assignment (1-2/3-6/4-5/7-8)
Pair Identification Pair1= Blue/White Pair2= Orange/White Pair3= Green/White Pair4= Brown/White
Transmission Performance NSI/TIA-568-C.2  category 7 (1-750 MHz) specifications
Constructor  4 pairs, 7 strands,28 AWG, SFTP
Cable Type SSTP Cat.7 Patch Cable
Outer Cable Diameter  6.0mm ± 0.2 mm
Outer Jacket PVC/LSZH Jacket
Type Shielded RJ45 8P8C Modular Plug
Housing  UL listed 94V-0/1/2 flame retardant polycarbonate
IDC blades  phosphor bronze, gold plating over 100 μin of nickel in contact area

Retention  50 N (11 lbf) for 60±5 s
Mating cycle life  min 750 cycles
Tensile strength  ≥ 20 N per wire
Installation Temperature  0°C to +60°C
Operating temperature  -20°C to +60°C
Minimum bend radius  4 outer cable diameters
Boot Type Any type of the above picture
Length 0.3m-30m or As per requested
Color Grey/Green/Blue/White/Black/Red/Yellow
Package polybag or Blister Package

Send Us a Message

Welcome to contact us by fill the right contact form or write to us directly by the contact info below:

+86 (0) 755-23769401

[email protected]

Send us a message if you have any questions or request a quote. Our experts will give you a reply within 12 hours and help you select the right product you want.

    Cat6A UTP Patch Cable, Pure 100% Copper, 23 AWG Stranded Cable

    If we are talking about a greater bandwidth and faster network speed than Cat6 UTP, then Cat6A UTP is the next-in-line option you can get. Cat6A UTP Patch cable is best unshielded copper cabling solution for doubling your Ethernet bandwidth capabilities of up to 500 MHz. It’s an unshielded augmented Cat6 cable that is designed for huge crosstalk elimination and ANEXT elimination.


    Our Cat6 UTP Ethernet Patch cables are terminated with RJ45 plugs, connected to a punch-down 110 block. We deliver with quality and signal integrity in our Cat6A UTP cables, meeting and exceeding ANSI/TIA-568-C.2 standards.


    Here at OTSCABLES we offer low priced cords that are UL Listed, ETL Verified and RoHS Compliant. We have options for you to choose from for our line of Cat6A UTP cables such as non-booted and snagless boot strain relief cables, available in a variety of colors.

    Cat6A Crossover UTP Patch Cable

    Cat6A UTP crossover patch cables are meant to be connected without the help of hubs and switches. These are typically seen in network devices where two or three devices are connected directly. Our Cat6A UTP crossover patch cords have TIA/EIA 568A termination on one end and TIA/EIA 568B termination on the other.

    Cat6A UTP Ethernet Patch Cable, Non-Booted Crimped/Assembly Style

    Construction of OTSCABLES Cat6A Non-Booted Patch Cord

    Our Cat6A Non-booted UTP cables are constructed by stripping the cable into the standard patch cable length, and a 50-micron, gold-plated RJ45 connector is crimped unto the wires. A load bar is used to separate the cables and reduce crosstalks.


    OTSCABLES offer non-booted Cat6A UTP patch cables ideal for populated network spaces where space-saving is a great deal. These are also ideal for simple applications and its more cost efficient than our booted cables.


    You can easily install these cables in home and office applications, in modems, routers, servers, hubs, printers, switch boxes, gaming console, VoIP, computers and many more. Plus, our Ethernet Cat6A UTP cables are compatible with computer devices such as routers, patch panels, modems, switches and hubs.

    Cat6A Molded Snagless Boot, Strain-Relief UTP Patch Cables

    Construction of OTSCABLES Cat6A UTP Snagless Boot Patch Cord

    Our Unshielded Cat6A Snagless, molded strain relief boot is made by injection molding, where the jacket material of the cable is pushed right into the connector and around the individual wires. They are designed with secure and efficiently constructed release tabs.


    With much consideration taken into designing the perfect snagless boot Cat6A UTP cables, easy dislodging of the RJ45 connector is less likely. The molded boots provide protection and  strain relief support for the RJ45 connectors.


    Cat6A UTP with snagless boot, RJ45 connectors Patch Cable is best for applications requiring frequent connection and disconnection from the source in many data centers.