Cat5e UTP Patch Cable

1. Conductors:24AWG or 26AWG or 28AWG stranded bare copper.
2. Insulation: polyolefin
3. Color code:
  • pair1: Blue, white/blue
  • pair2: Orange, white/orange
  • pair3: Green, white/Green
  • pair4: Brown, white/brown
4. Ripcord: under jacket
5. Jacket: pvc or LSZH
Inquiry This Item

1. Conductors 24AWG or 26AWG or 28AWG stranded bare copper.
2. Insulation polyolefin
3. Color code pair1: Blue, white/blue
pair2: Orange,white/orange
pair3: Green,white/Green
pair4: Brown,white/brown
4. Ripcord under jacket
5. Jacket pvc or LSZH
6. Standards UL444/CSA-C22.2 No 214,Type CM
EIA/TIA-568A and EIA/TIA-568B.2,Horizontal cable
7. Applications internet,computer
8. UTP unscreen cable
9. STP single shielding Network cable ,Mylar tape,Aluminum-mylar tape and Drain wire
10. SFTP Double shielding cable,Mylar tape,Aluminum-Mylar tape and drain wire and bare or tinned copper braid
11. Network cable Connector detail specification RJ45 8P8C nickel type
RJ45 8P8C golden type

Wiring Scheme
ANSI/TIA/EIA-568-C.2 T568A & T568B;ISO/IEC 11801
8-position conductor/pair assignment
T568B 1-2/3-6/4-5/7-8
T568A 3-6/1-2/4-5/7-8
Constructor 4 pairs, 7 strands, 24/26 AWG, UTP
Cable Type UTP Cat.5e Patch Cable
Outer Cable Diameter 5.5mm ± 0.2 mm
Pair Identification
Pair1 Blue/White
Pair2 Orange/White
Pair 3 Green/White
Pair4 Brown/White
Outer Jacket PVC/LSZH Jacket
Type Unshielded RJ45 8P8C Modular Plug
Housing UL listed 94V-0/1/2 flame retardant polycarbonate
IDC blades phosphor bronze, gold plating over 100 μin of nickel in contact area

Retention 50 N (11 lbf) for 60±5 s
Mating cycle life min 750 cycles
Tensile strength ≥ 20 N per wire
Installation Temperature 0°C to +60°C
Operating temperature -20°C to +60°C
Minimum bend radius 4 outer cable diameters
Boot Type: Any type of the above picture
Length 0.3m-30m or As per requested
Color Grey/Green/Blue/White/Black/Red/Yellow
Package polybag or Blister Package

Send Us a Message

Welcome to contact us by fill the right contact form or write to us directly by the contact info below:

+86 (0) 755-23769401

[email protected]

Send us a message if you have any questions or request a quote. Our experts will give you a reply within 12 hours and help you select the right product you want.

    Cat5e UTP Patch Cable, 100% Pure Copper, 24 AWG Stranded Cables

    Unshielded Cat5e Cable is a network cable consisting of four twisted pairs of copper wire for Fast Ethernet (10/100BASE-T) and Gigabit Ethernet (1000BASE-T) delivering up to 100 MHz bandwidth.

    OTSCABLES offer RJ45 Cat5e Ethernet Patch cable that can be connected using a punch-down, 110 block and modular connectors. Our Cat5e UTP Cable provides enhanced data transfer and lower crosstalk as compared to regular Cat5 cables.

    Our high-quality Ethernet Cat5e UTP cables meet and exceed ANSI/TIA-568-C.2 standards. All our cables are UL Listed, ETL Verified and RoHS Compliant. We carry non-booted and snagless booted strain relief unshielded Cat5e cables with a variety of colors to choose from.

    Unshielded Cat5e Ethernet Patch Cable, Non-Booted Crimped/Assembly Style

    Construction of OTSCABLES Cat5e Non-Booted Patch Cord

    Our Cat5e Non-booted UTP cables are constructed by stripping the cable into the standard patch cable length, and a 50-micron, gold-plated RJ45 connector is crimped unto the wires.


    Our non-booted Cat5e UTP patch cables are ideal for cramped up spaces where space-saving is a great deal. These are also ideal for simple applications and its more cost efficient than our booted cables.


    You can easily install these cables in home and office applications, in modems, routers, servers, hubs, printers, switch boxes, gaming console, VoIP, computers and many more. Plus, our Ethernet Cat5e UTP cables are compatible with computer devices such as routers, patch panels, modems, switches and hubs.

    Cat5e Molded Snagless Boot, Strain-Relief UTP Patch Cables

    Construction of OTSCABLES Cat5e UTP Snagless Boot Patch Cord

    Our Unshielded Cat5e Snagless, molded strain relief boot is made by injection molding, where the jacket material of the cable is pushed right into the connector and around the individual wires. They are designed with secure and efficiently constructed release tabs.


    In this way, the cable and connector is protected and dislodging of the RJ45 connector from the cable is less likely to happen as the molded boot provides strain relief support for the RJ45 connectors.


    Cat5e UTP with snagless boot, RJ45 connectors Patch Cable is best for applications requiring frequent connection and disconnection from the source in many data centers.

    Cat5e Crossover UTP Patch Cable

    OTSCABLES carry Cat5e UTP Crossover cables when you want to connect devices without using hubs or switches. Our Cat5e UTP crossover cables are unshielded and terminated with 50 Micron gold plated contacts RJ45 plugs at each end. With crossover cables, you can easily connect two computers, still keeping great signal integrity.